Bredsgaard A/S logo – Specialist i landbrugs-, have- og parkmaskiner

McConnel

Robocut T400

McConnel's all-terrain remote work platform increases safety by removing operators from steep, dangerous and hard-to-reach areas.

ROBOCUT can handle slopes of 55 degrees, has a working radius of 150 metres and is up to 25 times more productive than manual mowing.
Products in the category
McConnel T400 fjernstyret slagleklipper på skråning – ideel til effektiv og sikker græsklipning i udfordrende terræn. Tilgængelig hos Bredsgaard.dk.

McConnel Robocut T400

Introduction

Specifically designed to handle challenging terrain, the ROBOCUT T400 has a low centre of gravity and durable rubber tracks, making it an excellent mower for all terrains. It can master slopes of up to 55 degrees and improves operator safety by removing them from the danger zone.

The machine is powered by a 40hp three-cylinder Yanmar diesel engine that uses a DPF filter system to meet the latest Stage V emission regulations without the need for Adblue.

Key features:

  • Recognised Yanmar engine technology that meets Stage V requirements
  • Double rollover protection brackets
  • Fully enclosed metal panels
  • Flail heads up to 1.6 m wide
  • Responsive remote control unit
  • 150 m working radius
  • Innovative low centre of gravity
  • Options for belts
  • Robust build quality
  • Extensive range of accessories

McConnel Robocut T400

Features and functions

Access to all areas

ROBOCUT thrives in the most challenging terrains, making it easy to work on busy motorways, slopes, railway embankments, steep hills or riverbanks. It ensures safe and productive work without risk to life and limb.

Versatility

McConnel continues to expand its range of accessories, offering tools for almost any challenge. From snow removal to forestry, grass cutting to quarry maintenance, McConnel can provide a safe and productive remote solution.

McConnel Robocut T400

Benefits and advantages

  • Up to 25 times faster than manual mowing
  • Handles slopes up to 55 degrees
  • More fuel efficient than a three-man brushcutter team
  • Multifunctional remote control capability
  • Recognised motor technology ensures outstanding reliability
  • Easy to use with proportional controls
  • Safe working outside danger zones

McConnel Robocut T400

Specifications

Engine

  • Brand: YANMAR, 3 cylinder, Stage V
  • Horsepower: 40hp (27.5kw) @ 3000rpm
  • Torque: 105Nm
  • Fuel: Diesel
  • Fuel tank capacity: 21 litres
  • Water-cooled radiator: 3-core heavy duty
  • Self-cleaning (reversible fan): Standard manual and automatic
  • Transmission: Fine-tuned hydrostatic control
  • Maximum noise level: 80dB(A)

Hydraulics

  • Independent beater head circuit
  • Closed circuit piston pump
  • Max. 55 l/min @ 280 Bar
  • Independent belt drive circuit: 2 x closed circuit piston pump
  • Max. 57 l/min @ 250 Bar

In service

  • 1 double-acting auxiliary function
  • Independent intercooler: Standard
  • Oil tank capacity: 11 litres
  • Lifting capacity for accessories: 550kg

Belts

  • Rubber: Standard ~ maximum working degree 40°
  • Rubber with spikes: Optional ~ maximum working degree 55°
  • Self-clamping: Standard
  • Length (shaft to shaft): 1192mm

Remote control

  • Working radius: 150m
  • Frequency: 434Mhz (certified by CE legislation)
  • Battery: Replaceable, rechargeable, 2 with each unit, charging on machine
  • Proportional joysticks: Standard

Dimensions

  • Total width: 1310mm
  • Total length (without accessories): 1960mm
  • Total height: 1120mm

Weight

  • ROBOCUT2 RC40: 1150kg

Performance

  • Potentiometer speed control (0 - 100%):
      1. Gear (low range): Back and forth, 0 - 4km/h
      1. Gear (low range): Back and forth, 0 - 7km/h

Flail head / Accessories

  • Oil flow: 59 l/min
  • Pressure: 350 Bar
  • Rotor speed: 3300 rpm
  • Front and rear flaps: Standard
  • Slagler:
    • Y flail for cutting grass and light wood up to 30mm in diameter
    • J (hammer) flails for cutting thick grass and wood up to 50mm diameter
  • Rotor width: 1.3m to 1.6m
  • Roller diameter: 100mm
  • Cutting height range (via roller adjustment): 20mm - 85mm (5 positions)
  • Flail head can be lifted to cut higher
  • Hydraulic lift: -300mm to +400mm
  • Float angle: 14° up and down (+/-)

Bredsgaard A/S
Parallel road 19
8620 Kjellerup, Denmark

Company registration number: 33755147

Opening hours

Shop, warehouse and workshop:
Monday - Friday:
7.30 am - 4 pm
Saturday - Sunday:
On-call phone

On-call phone

Links

Shop, warehouse and workshop:
Monday - Friday:
7.30 am - 4 pm
Saturday - Sunday:
On-call phone

Newsletters
Facebook-f

Copyright © Bredsgaard A/S

en_GBEnglish (UK)
da_DKDansk en_GBEnglish (UK)

Menu

Other:

Bredsgaard A/S logo – Specialist i landbrugs-, have- og parkmaskiner